|
|
|
National Stock Number:
5310-99-606-5873
Federal Supply Class:
5310
National Item Identification Number:
996065873
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| B178763 | K0378 | ROLLS-ROYCE PLC | | B178763 | K0738 | HUBBELL LTD |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.070 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | BS S1 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR BS S511 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.375 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MOD(PE) DTD 904C MIL STD SINGLE TREATMENT RESPONSE OR BRISTOL SIDDELEY ENGINES LTD TN1006 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM | | THICKNESS | 0.036 INCHES NOMINAL |
|
|