|
|
|
National Stock Number:
5310-99-701-0276
Federal Supply Class:
5310
National Item Identification Number:
997010276
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 870-50205 | K7705 | KNDS DEFENCE UK LIMITED |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.312 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 2.290 INCHES MINIMUM AND 3.010 INCHES MAXIMUM | | FLANGE THICKNESS | 0.338 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | BS 970 PART 1 GRADE 070-20 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 1.500 INCHES | | NUT DIAMETER | 1.780 INCHES MINIMUM AND 1.820 INCHES MAXIMUM | | NUT LENGTH | 0.110 INCHES MINIMUM AND 0.115 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | 45 DEG HOLE 0.125IN. NOM ID;GROOVE 2.120IN. NOM DIA,0.120IN. NOM DEEP | | SURFACE TREATMENT | ZINC AND PASSIVATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 12 | | THREAD SERIES | UNF |
|
|