|
|
|
National Stock Number:
5310-99-788-2690
Federal Supply Class:
5310
National Item Identification Number:
997882690
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 100355-2000-001 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 100355-2000-001 | K1806 | MINISTRY OF DEFENCE, DE&S UNDERWATER AND ELECTRONIC WARFARE PT (UEW IPT) |
|
Techincal Specification:
| COUNTERBORE DIAMETER | 3.00 MILLIMETERS MINIMUM AND 3.40 MILLIMETERS MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 9.80 MILLIMETERS MINIMUM AND 10.20 MILLIMETERS MAXIMUM | | FLANGE THICKNESS | 1.66 MILLIMETERS MINIMUM AND 1.80 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | BS 970 PART 4 GRADE 316S16 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 3.00 MILLIMETERS | | NUT DIAMETER | 3.80 MILLIMETERS MINIMUM AND 4.20 MILLIMETERS MAXIMUM | | NUT COUNTERBORE DEPTH | 3.80 MILLIMETERS MINIMUM AND 4.20 MILLIMETERS MAXIMUM | | NUT LENGTH | 12.50 MILLIMETERS MINIMUM AND 12.90 MILLIMETERS MAXIMUM | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | TAPPING DRILL THROUGH | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 7.00 MILLIMETERS MINIMUM | | THREAD PITCH IN MILLIMETERS | 0.50 | | THREAD TOLERANCE CLASS | 6H INTERNAL | | THREAD SERIES | ISO M |
|
|