|
|
|
National Stock Number:
5310-99-789-7441
Federal Supply Class:
5310
National Item Identification Number:
997897441
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| B508976 | K0378 | ROLLS-ROYCE PLC |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | BOTTOM RECESS DIAMETER | 5.7612 INCHES NOMINAL | | HOLE DIAMETER | 5.7000 INCHES MINIMUM AND 5.7024 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MSRR6503 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.1025 INCHES MINIMUM AND 0.1035 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | OUTSIDE DIAMETER | 6.190 INCHES MINIMUM AND 6.210 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DIAMETER | 5.7612 INCHES NOMINAL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | TOP RECESS DIAMETER | 5.7612 INCHES NOMINAL | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
|
|