|
|
|
National Stock Number:
5310-99-807-7716
Federal Supply Class:
5310
National Item Identification Number:
998077716
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| CH125-00-0000 | K0377 | GOODRICH ACTUATION SYSTEMS LIMITED | | CH125-05-0213 | K0377 | GOODRICH ACTUATION SYSTEMS LIMITED |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 21.08 MILLIMETERS MINIMUM AND 21.20 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | BS 980 CDS-2 NATIONAL SPEC SINGLE MATERIAL RESPONSE OR BS S93 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 27.80 MILLIMETERS MINIMUM AND 27.92 MILLIMETERS MAXIMUM | | THICKNESS | 2.00 MILLIMETERS NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND |
|
|