|
|
|
National Stock Number:
5315-00-001-9478
Federal Supply Class:
5315
National Item Identification Number:
000019478
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 2122700-14 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 2122700PC14 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2122702-14 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 5599404-5 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130H OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 35.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | GROOVE | | OVERALL LENGTH | 0.500 INCHES NOMINAL | | DIAMETER | 0.2501 INCHES MINIMUM AND | | 0.2503 INCHES MAXIMUM | | EFFECTIVE LENGTH | 0.257 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.1729 INCHES MINIMUM AND | | 0.1739 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.047 INCHES MINIMUM AND | | 0.051 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED W/THRU HOLE | | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL | | FIRST END TAPER ANGLE | 10.0 DEGREES MINIMUM AND | | 15.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | SPECIAL FEATURES | THRU HOLE THD ON BOTH ENDS 4-40 UNC 2B 0.112 IN. MIN LG,WITH RETAINING RING |
|
|