|
|
|
National Stock Number:
5315-00-052-6459
Federal Supply Class:
5315
National Item Identification Number:
000526459
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 215-72426-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLC | | 911606-4 | 90536 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.810 INCHES MINIMUM AND | | 0.815 INCHES MAXIMUM | | DIAMETER | 0.122 INCHES MINIMUM AND | | 0.123 INCHES MAXIMUM | | HEAD STYLE | FLAT | | MANUFACTURERS CODE | 80378 | | DESIGN CONTROL REFERENCE | 215-72426-1 | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 46.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.030 INCHES NOMINAL | | PIN CHAMFER ANGLE | 35.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.195 INCHES MINIMUM AND | | 0.205 INCHES MAXIMUM | | HEIGHT | 0.040 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES SHANK END | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | |
|
|