5315-00-081-7039, PIN,STRAIGHT,HEADED

National Stock Number:
5315-00-081-7039

Federal Supply Class:
5315

National Item Identification Number:
000817039

Description:
PIN,STRAIGHT,HEADED

Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.

Manufacturer Information:

MS20392-7-31	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS20392-7C31	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NASM5673	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS20392-7C31	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

UNDER HEAD LENGTH	1.147 INCHES MINIMUM AND
	1.167 INCHES MAXIMUM
DIAMETER	0.495 INCHES MINIMUM AND
	0.497 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
STYLE DESIGNATOR	STRAIGHT
MATERIAL	STEEL COMP 4037 OR
	STEEL COMP 4130 OR
	STEEL COMP 8630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-8695 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR
	MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND
	CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	26.5 ROCKWELL C MINIMUM AND
	32.0 ROCKWELL C MAXIMUM OVERALL
CHAMFER LENGTH	0.078 INCHES NOMINAL
PIN CHAMFER ANGLE	15.0 DEGREES NOMINAL
PIN HEAD DIAMETER	0.625 INCHES NOMINAL
HEIGHT	0.093 INCHES NOMINAL
HOLE ARRANGEMENT STYLE	ONE END DRILLED
FIRST HOLE DIAMETER	0.096 INCHES MINIMUM AND
	0.116 INCHES MAXIMUM
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN	0.135 INCHES NOMINAL

Click here to Register for Free 30-day Trial