|
|
|
National Stock Number:
5315-00-102-7787
Federal Supply Class:
5315
National Item Identification Number:
001027787
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 6862223 | 63005 | ROLLS-ROYCE CORPORATION | | 6862223 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 0.425 INCHES MINIMUM AND | | 0.445 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.388 INCHES MINIMUM AND | | 0.389 INCHES MAXIMUM | | SHANK DIAMETER | 0.341 INCHES MINIMUM AND | | 0.342 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.220 INCHES MINIMUM AND | | 0.330 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.035 INCHES MINIMUM AND | | 0.055 INCHES MAXIMUM | | SECOND UNDERCUT WIDTH | 1.000 INCHES MINIMUM AND | | 1.010 INCHES MAXIMUM | | SECOND UNDERCUT DIAMETER | 0.220 INCHES MINIMUM AND | | 0.330 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.343 INCHES MINIMUM AND | | 0.344 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.325 INCHES MINIMUM AND | | 0.345 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND | | 0.025 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 63005 | | DESIGN CONTROL REFERENCE | 6862223 |
|
|