|
|
|
National Stock Number:
5315-00-115-6846
Federal Supply Class:
5315
National Item Identification Number:
001156846
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 60-302 | 01359 | TRIUMPH THERMAL SYSTEMS - MARYLAND, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1018 OR | | STEEL COMP 1020 OR | | STEEL COMP 1025 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7097 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND | | 62.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.061 INCHES MINIMUM AND | | 0.065 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.061 INCHES MINIMUM AND | | 0.065 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.089 INCHES MINIMUM AND | | 0.099 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.091 INCHES MINIMUM AND | | 1.111 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 1.320 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.1865 INCHES MINIMUM AND | | 0.1885 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 01359 | | DESIGN CONTROL REFERENCE | 60-302 |
|
|