|
|
|
National Stock Number:
5315-00-119-9351
Federal Supply Class:
5315
National Item Identification Number:
001199351
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 29-47796-2 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | HEAD STYLE | FLAT | | MATERIAL | STEEL COMP 4340 OVERALL | | STYLE DESIGNATOR | GROOVE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 33.0 ROCKWELL C MAXIMUM OVERALL | | SHEAR STRENGTH | 160000 SINGLE POUNDS PER SQUARE INCH | | DIAMETER | 0.870 INCHES MINIMUM AND | | 0.875 INCHES MAXIMUM | | EFFECTIVE LENGTH | 1.500 INCHES MINIMUM AND | | 1.510 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.817 INCHES MINIMUM AND | | 0.825 INCHES MAXIMUM | | UNDER HEAD LENGTH | 1.620 INCHES MINIMUM AND | | 1.640 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.046 INCHES MINIMUM AND | | 0.049 INCHES MAXIMUM | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 1.070 INCHES NOMINAL | | HEIGHT | 0.080 INCHES MINIMUM AND | | 0.100 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81205 | | DESIGN CONTROL REFERENCE | 29-47796-2 |
|
|