|
|
|
National Stock Number:
5315-00-133-1096
Federal Supply Class:
5315
National Item Identification Number:
001331096
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10912031 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5315001331096 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315001331096 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1015 OR | | STEEL COMP 1025 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630 FED SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 88.3 ROCKWELL SUPERFICIAL 15-N MINIMUM AND | | 91.4 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.231 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.231 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.625 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.062 INCHES MINIMUM AND | | 5.067 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 6.310 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.4978 INCHES MINIMUM AND | | 0.4988 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED | | SPECIAL FEATURES | 45 DEG ANGLE BETWEEN C/L OF HOLES |
|
|