|
|
|
National Stock Number:
5315-00-138-6398
Federal Supply Class:
5315
National Item Identification Number:
001386398
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 8499699-1 | 11447 | L3 TECHNOLOGIES, INC. | | 8499699-1 | 49671 | LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES |
|
Techincal Specification:
| UNDER HEAD LENGTH | 2.646 INCHES MINIMUM AND | | 2.666 INCHES MAXIMUM | | DIAMETER | 0.371 INCHES MINIMUM AND | | 0.373 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 3140 OR | | STEEL COMP 4037 OR | | STEEL COMP 4130 OR | | STEEL COMP 8630 OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 1 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.5 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.078 INCHES NOMINAL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.500 INCHES NOMINAL | | HEIGHT | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.096 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.197 INCHES NOMINAL | | SPECIAL FEATURES | DRILLED HOLE FROM HEAD END 0.104 IN. DIA BY 0.380 IN. DEEP | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11447 | | DESIGN CONTROL REFERENCE | 8499699-1 |
|
|