|
|
|
National Stock Number:
5315-00-145-2084
Federal Supply Class:
5315
National Item Identification Number:
001452084
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 5315001452084 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315001452084 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 8619536 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.031 INCHES MINIMUM AND | | 1.062 INCHES MAXIMUM | | DIAMETER | 0.248 INCHES MINIMUM AND | | 0.249 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 1015 OR | | STEEL COMP 1016 OR | | STEEL COMP 1018 OR | | STEEL COMP 1019 OR | | STEEL COMP 1020 OR | | STEEL COMP 1022 OR | | STEEL COMP 1025 OR | | STEEL COMP B1111 OR | | STEEL COMP B1112 OR | | STEEL COMP 1213 OR | | STEEL COMP 1215 OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.016 INCHES MINIMUM AND | | 0.031 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.594 INCHES MINIMUM AND | | 0.625 INCHES MAXIMUM | | HEIGHT | 0.078 INCHES MINIMUM AND | | 0.094 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.078 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.096 INCHES MINIMUM AND | | 0.132 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL |
|
|