|
|
|
National Stock Number:
5315-00-165-8411
Federal Supply Class:
5315
National Item Identification Number:
001658411
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 732124-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.020 INCHES MINIMUM AND | | 1.040 INCHES MAXIMUM | | DIAMETER | 0.062 INCHES NOMINAL | | HEAD STYLE | FLAT | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.060 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 13.0 DEGREES MINIMUM AND | | 17.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.180 INCHES MINIMUM AND | | 0.200 INCHES MAXIMUM | | HEIGHT | 0.030 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.022 INCHES MINIMUM AND | | 0.027 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.100 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM | | SURFACE FINISH | 16.0 MICROINCHES SHANK END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 732124-1 |
|
|