| FIRST END STYLE | CHAMFERED |
| HEAD STYLE | DEE |
| MATERIAL | STEEL COMP 1015 OR |
| STEEL COMP 1016 OR |
| STEEL COMP 1018 OR |
| STEEL COMP 1019 OR |
| STEEL COMP 1020 OR |
| STEEL COMP 1022 OR |
| STEEL COMP 1025 OVERALL |
| STYLE DESIGNATOR | GROOVE |
| SURFACE TREATMENT | PHOSPHATE ZINC OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232 TY Z CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND |
| 62.0 ROCKWELL C MAXIMUM OVERALL |
| DIAMETER | 0.7495 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| EFFECTIVE LENGTH | 4.922 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.688 INCHES NOMINAL |
| UNDER HEAD LENGTH | 5.156 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.062 INCHES NOMINAL |
| FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| DISTANCE FROM CENTERLINE TO FLAT | 0.438 INCHES NOMINAL |
| PIN HEAD DIAMETER | 1.125 INCHES NOMINAL |
| HEIGHT | 0.375 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.094 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.187 INCHES NOMINAL |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 19207 |
| DESIGN CONTROL REFERENCE | 10862062 |