|
|
|
National Stock Number:
5315-00-177-1359
Federal Supply Class:
5315
National Item Identification Number:
001771359
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 69291C6-3-10 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.350 INCHES MINIMUM AND | | 0.360 INCHES MAXIMUM | | DIAMETER | 0.0932 INCHES MINIMUM AND | | 0.0934 INCHES MAXIMUM | | HEAD STYLE | FLAT | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL OVERALL | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.020 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 18.0 DEGREES MINIMUM AND | | 22.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.213 INCHES MINIMUM AND | | 0.223 INCHES MAXIMUM | | HEIGHT | 0.025 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.037 INCHES MINIMUM AND | | 0.042 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.042 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 69291C6-3-10 |
|
|