|
|
|
National Stock Number:
5315-00-177-7649
Federal Supply Class:
5315
National Item Identification Number:
001777649
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 8447088-4 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1019 OR | | STEEL COMP 1020 OR | | STEEL COMP 1022 OR | | STEEL COMP 1025 OR | | STEEL COMP 1112 OR | | STEEL COMP 1113 OR | | STEEL COMP 1117 OR | | STEEL COMP 1118 OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232,TYM,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.107 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.107 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.120 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.922 INCHES MINIMUM AND | | 2.937 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.190 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3750 INCHES NOMINAL |
|
|