|
|
|
National Stock Number:
5315-00-198-4611
Federal Supply Class:
5315
National Item Identification Number:
001984611
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 39A106-08 | 35351 | GE AVIATION SYSTEMS LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416 OR | | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR | | SM1851-01 FSCM 35351 MFR REF 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.016 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.015 INCHES MINIMUM AND | | 0.025 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 5.0 DEGREES MINIMUM AND | | 15.0 DEGREES MAXIMUM | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 0.484 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.0940 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 35351 | | DESIGN CONTROL REFERENCE | 39A106-08 |
|
|