|
|
|
National Stock Number:
5315-00-205-0152
Federal Supply Class:
5315
National Item Identification Number:
002050152
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 47-620-619-3 | 80070 | LOCKHEED MARTIN CORPORATION | | 47-620-619-3 | 97499 | BELL TEXTRON INC | | 5315H13-003-3 | 81996 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | HEAD STYLE | FLAT | | MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | GROOVE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 36.0 ROCKWELL C MAXIMUM OVERALL | | DIAMETER | 0.3825 INCHES MINIMUM AND | | 0.8230 INCHES MAXIMUM | | EFFECTIVE LENGTH | 1.128 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.350 INCHES MINIMUM AND | | 0.354 INCHES MAXIMUM | | UNDER HEAD LENGTH | 1.218 INCHES NOMINAL | | UNDERCUT WIDTH | 0.028 INCHES MINIMUM AND | | 0.031 INCHES MAXIMUM | | SECOND UNDERCUT WIDTH | 0.060 INCHES NOMINAL | | SECOND UNDERCUT DIAMETER | 0.3795 INCHES MINIMUM AND | | 0.3800 INCHES MAXIMUM | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.500 INCHES NOMINAL | | HEIGHT | 0.047 INCHES NOMINAL | | SURFACE FINISH | 13.0 MICROINCHES OUTSIDE DIAMETER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 47-620-619-3 |
|
|