|
|
|
National Stock Number:
5315-00-209-5001
Federal Supply Class:
5315
National Item Identification Number:
002095001
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 13207E6087-4 | 97403 | CECOM LR CENTER |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4340 OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2B FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.130 INCHES MINIMUM AND | | 0.150 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.130 INCHES MINIMUM AND | | 0.150 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.150 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.891 INCHES MINIMUM AND | | 5.921 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 6.210 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.9900 INCHES MINIMUM AND | | 0.9950 INCHES MAXIMUM |
|
|