| MATERIAL | STEEL OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | OD8853,TY C,GRADE 1 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND |
| 45.0 ROCKWELL C MAXIMUM OVERALL |
| STYLE DESIGNATOR | GROOVE |
| OVERALL LENGTH | 2.781 INCHES NOMINAL |
| DIAMETER | 0.624 INCHES MINIMUM AND |
| 0.625 INCHES MAXIMUM |
| EFFECTIVE LENGTH | 2.453 INCHES MINIMUM AND |
| 2.463 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.593 INCHES MINIMUM AND |
| 0.599 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.039 INCHES MINIMUM AND |
| 0.042 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FIRST END LOCATION | BOTH ENDS |
| HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES |
| FIRST HOLE DIAMETER | 0.062 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.062 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.734 INCHES NOMINAL |
| ANGLE BETWEEN CENTERLINE OF HOLES | 180.0 DEGREES NOMINAL |
| SURFACE FINISH | 125.0 MICROINCHES BOTH ENDS |
| 16.0 MICROINCHES OUTSIDE DIAMETER |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 10001 |
| DESIGN CONTROL REFERENCE | 733159PC2 |