|
|
|
National Stock Number:
5315-00-212-0017
Federal Supply Class:
5315
National Item Identification Number:
002120017
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 14-11562-3 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 14-11562-3 | 28548 | FABRICATION SPECIALTY INC | | 14-11562-3 | 30205 | MERCER PRODUCTS & MANUFACTURING COMPANY | | 14-11562-3 | 6Z800 | A AND M AEROSPACE, INC. | | 14-11562-3 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.845 INCHES NOMINAL | | DIAMETER | 0.309 INCHES MINIMUM AND | | 0.311 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11 T6511 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | CHAMFER LENGTH | 0.031 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.437 INCHES NOMINAL | | HEIGHT | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.106 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.135 INCHES NOMINAL | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 30205 | | DESIGN CONTROL REFERENCE | 14-11562-3 |
|
|