5315-00-234-1668, PIN,COTTER

National Stock Number:
5315-00-234-1668

Federal Supply Class:
5315

National Item Identification Number:
002341668

Description:
PIN,COTTER

Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.

Manufacturer Information:

122-6600339 PC 39	53711	NAVAL SEA SYSTEMS COMMAND
122-6600340 PC 22	53711	NAVAL SEA SYSTEMS COMMAND
122-6600341 PC 22	53711	NAVAL SEA SYSTEMS COMMAND
122-6600342 PC 22	53711	NAVAL SEA SYSTEMS COMMAND
122-6600343 PC 22	53711	NAVAL SEA SYSTEMS COMMAND
122-6600343 PC 31	53711	NAVAL SEA SYSTEMS COMMAND
122-6600345 PC 22	53711	NAVAL SEA SYSTEMS COMMAND
122-6600361 PC 20	53711	NAVAL SEA SYSTEMS COMMAND
122-6938615 PC 22	53711	NAVAL SEA SYSTEMS COMMAND
122-6938615 PC 31	53711	NAVAL SEA SYSTEMS COMMAND
122-6938616 PC 22	53711	NAVAL SEA SYSTEMS COMMAND
122-6938616 PC 31	53711	NAVAL SEA SYSTEMS COMMAND
5315002341668	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5315002341668	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
MS24665-504	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NASM24665	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS24665-504	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MXL2-463DPC337	97384	TEXTRON SYSTEMS CORPORATION

Techincal Specification:

MATERIAL	STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM E30 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND
	CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATOR	STANDARD
DIAMETER	0.172 INCHES MINIMUM AND
	0.176 INCHES MAXIMUM
UNDERLOOP LENGTH	3.875 INCHES MINIMUM AND
	4.125 INCHES MAXIMUM
POINT TYPE	EXTENDED PRONG SQUARE CUT

Click here to Register for Free 30-day Trial