| CENTER TO CENTER DISTANCE BETWEEN HOLES | 7.896 INCHES MINIMUM AND 7.916 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.594 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.187 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66,1010 TO 1025 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| OVERALL LENGTH | 11.094 INCHES NOMINAL |
| MATERIAL | STEEL OVERALL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.187 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| SHANK DIAMETER | 0.6220 INCHES MINIMUM AND 0.6235 INCHES MAXIMUM |
| SHANK LENGTH | 2.031 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.750 INCHES NOMINAL |
| STYLE DESIGNATOR | SHOULDER |
| SPECIAL FEATURES | SHOULDER PRIMED PER TT-P-659 ENAMEL WHITE PER TT-E-489; 29.0 DEG MIN 31.0 DEG MAX ANGLE BETWEEN CENTERLINES OF HOLES |
| SURFACE FINISH | 32.0 MICROINCHES SHANK END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |