|
|
|
National Stock Number:
5315-00-235-5270
Federal Supply Class:
5315
National Item Identification Number:
002355270
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1148855-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | H581160302 | 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OR | | STEEL COMP 416 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 42.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.014 INCHES NOMINAL | | FIRST END TAPER ANGLE | 20.0 DEGREES MINIMUM AND | | 30.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 0.110 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.0313 INCHES MINIMUM AND | | 0.0315 INCHES MAXIMUM | | SPECIAL FEATURES | SMALL CHAMFER END MAY HAVE 0.008 IN. MIN 0.015 IN. MAX RADIUS IN LIEU OF CHAMFER |
|
|