|
|
|
National Stock Number:
5315-00-236-8345
Federal Supply Class:
5315
National Item Identification Number:
002368345
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 10195838 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5067438 | 16748 | GENERAL MOTORS CORP DELCO PRODUCTS DIV | | 5309267 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5067438 | 24617 | GENERAL MOTORS CORP | | 5315PL0157254 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 940.17.02.202 | S4080 | PILATUS AIRCRAFT LTD | | MS24665-5 | 1YS22 | D&T FASTENERS INC. | | MS24665-5 | 2N935 | BOEING DISTRIBUTION SERVICES X, INC. | | MS24665-5 | 2V484 | BOEING DISTRIBUTION SERVICES, INC. | | MS24665-5 | 3G1W3 | BOEING DISTRIBUTION SERVICES DEFENSE LLC | | MS24665-5 | 65029 | MATTHEW WARREN, INC | | MS24665-5 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | AN380-1-2 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24665-5 | 84114 | AMSTEEL, INC. | | NASM24665 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24665-5 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24665-5 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM E30 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | STANDARD | | DIAMETER | 0.028 INCHES MINIMUM AND | | 0.032 INCHES MAXIMUM | | UNDERLOOP LENGTH | 0.438 INCHES MINIMUM AND | | 0.625 INCHES MAXIMUM | | POINT TYPE | EXTENDED PRONG SQUARE CUT |
|
|