|
|
|
National Stock Number:
5315-00-236-8365
Federal Supply Class:
5315
National Item Identification Number:
002368365
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 10088141 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 122-6600361 PC 27 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 122-7270389 PC 37 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 122-7270390 PC 37 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 167-7066788-14 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5315PL1739932 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 709-5343924 ITEM 144 | 43689 | HUNTINGTON INGALLS INC | | 5486672 ITEM 144 | 53711 | NAVAL SEA SYSTEMS COMMAND | | NASM24665 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24665-380 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | 709-6397728 ITE | 8F411 | SALES SYSTEMS, LIMITED | | H545-1304-14 | 96169 | ELECTRIC BOAT CORPORATION | | MS24665-380 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24665-380 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OR | | STEEL COMP 304 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 55.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND | | 67.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL | | STYLE DESIGNATOR | STANDARD | | DIAMETER | 0.116 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM | | UNDERLOOP LENGTH | 2.875 INCHES MINIMUM AND | | 3.125 INCHES MAXIMUM | | POINT TYPE | EXTENDED PRONG SQUARE CUT | | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY POINT STYLE |
|
|