|
|
|
National Stock Number:
5315-00-238-1071
Federal Supply Class:
5315
National Item Identification Number:
002381071
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 14-41678-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 14-41678-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | NA1-1260,COMP 4340,76823 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.155 INCHES MINIMUM AND | | 0.160 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.257 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.190 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.970 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES BOTH ENDS | | 32.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 2.940 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.8735 INCHES MINIMUM AND | | 0.8745 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 76823 | | DESIGN CONTROL REFERENCE | 14-41678-1 |
|
|