|
|
|
National Stock Number:
5315-00-241-7427
Federal Supply Class:
5315
National Item Identification Number:
002417427
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 5226393 | 24617 | GENERAL MOTORS CORP | | 5226393 | 71934 | GENERAL MOTORS CORP ROCHESTER PRODUCTS DIV | | K5226393 | 18954 | KORODY-COLYER CORP A CR INDUSTRIES CO | | N24188-20 | 24617 | GENERAL MOTORS CORP | | 5226393 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5226393 | 7X677 | GENERAL MOTORS LLC | | N24188-20 | 55380 | HATCH & KIRK, INC. | | N24188-20 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV | | N24188-20 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.005 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.0947 INCHES MINIMUM AND 0.0952 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.109 INCHES MINIMUM AND 0.115 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 10.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM | | SECOND END TAPER LENGTH | 0.020 INCHES NOMINAL |
|
|