|
|
|
National Stock Number:
5315-00-242-9150
Federal Supply Class:
5315
National Item Identification Number:
002429150
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 657570 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.060 INCHES MINIMUM AND | | 1.080 INCHES MAXIMUM | | DIAMETER | 0.3750 INCHES MINIMUM AND | | 0.3755 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.110 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 13.0 DEGREES MINIMUM AND | | 17.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | HEIGHT | 0.050 INCHES MINIMUM AND | | 0.070 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.094 INCHES MINIMUM AND | | 0.101 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.220 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | SPECIAL FEATURES | 0.250 IN. NOM DIA LONGITUD1NAL HOLE 0.740 IN. DP CENTERED IN HEAD | | CRITICALITY CODE JUSTIFICATION | ABMZ | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77445 | | DESIGN CONTROL REFERENCE | 657570 |
|
|