|
|
|
National Stock Number:
5315-00-244-3981
Federal Supply Class:
5315
National Item Identification Number:
002443981
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1B5696 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.2400 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM | | PIN OVERALL LENGTH | 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SECOND HOLE DIAMETER | 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM |
|
|