|
|
|
National Stock Number:
5315-00-253-4142
Federal Supply Class:
5315
National Item Identification Number:
002534142
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| P32763 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.750 INCHES MINIMUM AND 2.760 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.172 INCHES MINIMUM AND 0.175 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | PIN OVERALL LENGTH | 3.375 INCHES MINIMUM AND 3.395 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.6130 INCHES MINIMUM AND 0.6170 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM | | SECOND END TAPER LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
|
|