|
|
|
National Stock Number:
5315-00-254-6218
Federal Supply Class:
5315
National Item Identification Number:
002546218
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10236089-1 | 09205 | LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV | | 10236089-1 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 10236089-1 | 26772 | WEGO PRECISION MACHINE, INC. | | 10236089-1 | 80477 | ADAMS RITE AEROSPACE, INC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 3.560 INCHES NOMINAL | | FIRST END SLOT DEPTH | 0.500 INCHES NOMINAL | | FIRST END SLOT WIDTH | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | FIRST END STYLE | SLOTTED | | HOLE ARRANGEMENT STYLE | DRILLED SLOTTED END | | PIN OVERALL LENGTH | 3.750 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3630 INCHES MINIMUM AND 0.3650 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4130 OVERALL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 14.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.500 INCHES NOMINAL | | SECOND END TIP RADIUS | 0.070 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
|
|