|
|
|
National Stock Number:
5315-00-292-9734
Federal Supply Class:
5315
National Item Identification Number:
002929734
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| A81-1-4932 | 81361 | EDGEWOOD CHEMICAL BIOLOGICAL CENTER ECBC |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.177 INCHES MINIMUM AND | | 0.187 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.312 INCHES NOMINAL | | SHANK DIAMETER | 0.247 INCHES MINIMUM AND | | 0.249 INCHES MAXIMUM | | OVERALL LENGTH | 1.266 INCHES MINIMUM AND | | 1.297 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.219 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | FIRST STEP DIAMETER | 0.3125 INCHES NOMINAL | | FIRST STEP LENGTH | 0.2750 INCHES NOMINAL | | SECOND STEP DIAMETER | 0.2490 INCHES NOMINAL | | SECOND STEP LENGTH | 0.4370 INCHES NOMINAL | | THIRD STEP DIAMETER | 0.1250 INCHES NOMINAL | | THIRD STEP LENGTH | 0.1820 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES MINIMUM AND | | 0.047 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND | | 50.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | SPECIAL FEATURES | 0.438 IN. RADIUS ON UNDERCUT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81361 | | DESIGN CONTROL REFERENCE | A81-1-4932 |
|
|