|
|
|
National Stock Number:
5315-00-295-9650
Federal Supply Class:
5315
National Item Identification Number:
002959650
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 68A312057-2001 | 09398 | SUPERIOR THREAD ROLLING CO, LLC | | 68A312057-2001 | 31362 | RHEACO INC. | | 68A312057-2001 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS13001,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 1.350 INCHES NOMINAL | | SHOULDER DIAMETER | 0.630 INCHES NOMINAL | | SHANK DIAMETER | 0.2485 INCHES MINIMUM AND | | 0.2490 INCHES MAXIMUM | | OVERALL LENGTH | 2.550 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.367 INCHES MINIMUM AND | | 0.369 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.050 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND | | 0.070 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | POINTED | | SECOND END TAPER LENGTH | 0.660 INCHES NOMINAL | | SECOND END TAPER ANGLE | 74.0 DEGREES NOMINAL | | FIRST END LOCATION | SHANK END | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.349 INCHES MINIMUM AND | | 0.364 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES ALL OTHER SURFACES | | 63.0 MICROINCHES SHOULDER END | | SPECIAL FEATURES | 0.060 IN. RADIUS ON POINTED SHANK;0.490 IN. MIN 0.500 IN. MAX WIDE WRENCHING FLATS LOCATED ON SHOULDER OD 180.0 DEG APART;0.181 IN. MIN 0.191 IN. MAX DIA,0.096 IN. MIN 0.111 IN. MAX WIDE THREAD RELIEF LOCATED ON THREADED SHANK | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 76301 | | DESIGN CONTROL REFERENCE | 68A312057-2001 |
|
|