|
|
|
National Stock Number:
5315-00-298-9902
Federal Supply Class:
5315
National Item Identification Number:
002989902
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 00020 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY 360 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AA-B-626 COMP 22 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 1.672 INCHES MINIMUM AND | | 1.703 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.465 INCHES MINIMUM AND | | 0.467 INCHES MAXIMUM | | SHANK DIAMETER | 0.465 INCHES MINIMUM AND | | 0.467 INCHES MAXIMUM | | OVERALL LENGTH | 6.734 INCHES MINIMUM AND | | 6.766 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.360 INCHES MINIMUM AND | | 0.365 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.375 INCHES MINIMUM AND | | 0.391 INCHES MAXIMUM | | SECOND UNDERCUT WIDTH | 0.375 INCHES MINIMUM AND | | 0.391 INCHES MAXIMUM | | SECOND UNDERCUT DIAMETER | 0.360 INCHES MINIMUM AND | | 0.365 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.465 INCHES MINIMUM AND | | 0.467 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.672 INCHES MINIMUM AND | | 1.703 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.016 INCHES MINIMUM AND | | 0.047 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.110 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.110 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.266 INCHES MINIMUM AND | | 0.297 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.172 INCHES MINIMUM AND | | 6.203 INCHES MAXIMUM |
|
|