|
|
|
National Stock Number:
5315-00-319-6543
Federal Supply Class:
5315
National Item Identification Number:
003196543
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 611130 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MANUFACTURERS CODE | 10001 | | DESIGN CONTROL REFERENCE | 611130 | | FIRST END STYLE | RADIUS | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | GROOVE | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL | | DIAMETER | 0.375 INCHES MINIMUM AND | | 0.3754 INCHES MAXIMUM | | EFFECTIVE LENGTH | 1.146 INCHES MINIMUM AND | | 1.166 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.350 INCHES MINIMUM AND | | 0.354 INCHES MAXIMUM | | UNDER HEAD LENGTH | 1.250 INCHES NOMINAL | | UNDERCUT WIDTH | 0.028 INCHES MINIMUM AND | | 0.031 INCHES MAXIMUM | | SECOND UNDERCUT WIDTH | 0.047 INCHES MINIMUM AND | | 0.062 INCHES MAXIMUM | | SECOND UNDERCUT DIAMETER | 0.365 INCHES MINIMUM AND | | 0.370 INCHES MAXIMUM | | FIRST END CORNER RADIUS | 0.020 INCHES NOMINAL | | PIN HEAD DIAMETER | 0.500 INCHES NOMINAL | | HEIGHT | 0.094 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | FIRST HOLE DIAMETER | 0.094 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES HEAD BEARING SURFACE | | 32.0 MICROINCHES LONG END | | 125.0 MICROINCHES SHOULDER END | | SPECIAL FEATURES | END OPPOSITE HEAD IS DRILLED 0.159 IN. DIA 0.750 IN. DEEP AND TAPPED 10-32 NF-2 0.300 IN. DEEP ON AXIAL C CTR LINE | | THE MANUFACTURERS DATA | |
|