|
|
|
National Stock Number:
5315-00-323-3254
Federal Supply Class:
5315
National Item Identification Number:
003233254
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| MS16556-821 | 45078 | DOWELS PINS AND SHAFTS INC | | MS16556-821 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS16556-821 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND | | 64.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.008 INCHES MINIMUM AND | | 0.031 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 20.0 DEGREES MINIMUM AND | | 30.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.035 INCHES NOMINAL | | SECOND END TAPER ANGLE | 4.0 DEGREES MINIMUM AND | | 12.0 DEGREES MAXIMUM | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 0.615 INCHES MINIMUM AND | | 0.635 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.0946 INCHES MINIMUM AND | | 0.0948 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED | | SPECIAL FEATURES | SMALL CHAMFER END MAY HAVE 0.008 IN. MIN 0.031 IN. MAX RADIUS IN LIEU OF CHAMFER | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS16556-821 |
|
|