|
|
|
National Stock Number:
5315-00-326-2418
Federal Supply Class:
5315
National Item Identification Number:
003262418
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 20-18602-7 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,COMP 4140 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-6871,TYPE 2,CLASS B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.189 INCHES MINIMUM AND | | 0.195 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.191 INCHES MINIMUM AND | | 0.197 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.350 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.830 INCHES NOMINAL | | SURFACE FINISH | 250.0 MICROINCHES BOTH ENDS | | 63.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 5.450 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.4340 INCHES MINIMUM AND | | 0.4360 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 76301 | | DESIGN CONTROL REFERENCE | 20-18602-7 |
|
|