|
|
|
National Stock Number:
5315-00-328-7033
Federal Supply Class:
5315
National Item Identification Number:
003287033
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 2555029 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| UNDER HEAD LENGTH | 2.858 INCHES MINIMUM AND | | 2.867 INCHES MAXIMUM | | DIAMETER | 0.184 INCHES MINIMUM AND | | 0.185 INCHES MAXIMUM | | HEAD STYLE | FLAT FILLISTER | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 4130 OR | | STEEL COMP 4140 OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.030 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.266 INCHES MINIMUM AND | | 0.276 INCHES MAXIMUM | | HEIGHT | 0.343 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.057 INCHES MINIMUM AND | | 0.067 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.108 INCHES MINIMUM AND | | 0.112 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES HEAD BEARING SURFACE | | 125.0 MICROINCHES HEAD OUTSIDE DIAMETER | | 125.0 MICROINCHES HEAD TOP | | 63.0 MICROINCHES LONG SHANK | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 10001 | | DESIGN CONTROL REFERENCE | 2555029 |
|
|