| UNDER HEAD LENGTH | 1.080 INCHES MINIMUM AND |
| 1.100 INCHES MAXIMUM |
| DIAMETER | 0.1205 INCHES MINIMUM AND |
| 0.1215 INCHES MAXIMUM |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| STYLE DESIGNATOR | STRAIGHT |
| MATERIAL | STEEL COMP 410 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND |
| 40.0 ROCKWELL C MAXIMUM OVERALL |
| CHAMFER LENGTH | 0.010 INCHES MINIMUM AND |
| 0.030 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND |
| 50.0 DEGREES MAXIMUM |
| PIN HEAD DIAMETER | 0.210 INCHES MINIMUM AND |
| 0.230 INCHES MAXIMUM |
| HEIGHT | 0.037 INCHES MINIMUM AND |
| 0.057 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.033 INCHES MINIMUM AND |
| 0.038 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.070 INCHES MINIMUM AND |
| 0.110 INCHES MAXIMUM |
| SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE |
| SPECIAL TEST FEATURES | PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SEERIOUS INJURY |
| SPECIAL FEATURES | OUTSIDE DIA 63.0 MICROINCH FINISH |
| CRITICALITY CODE JUSTIFICATION | SPCL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 77445 |
| DESIGN CONTROL REFERENCE | 528753 |