|
|
|
National Stock Number:
5315-00-345-3827
Federal Supply Class:
5315
National Item Identification Number:
003453827
Description:
PIN,STRAIGHT,KNURLED
Detail:
A HEADLESS, CYLINDRICALLY-SHAPED, STRAIGHT, SOLID ITEM WITH OR WITHOUT A DRILLED HOLE(S). IT HAS A STRAIGHT OR DIAMOND KNURL. ITS LENGTH MUST NOT EXCEED 12 INCHES (304 MM). IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM.
|
Manufacturer Information:
| 1005003453827 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 1005003453827 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7267851 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINE OF HOLES | 90.0 DEGREES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 11.0 DEGREES NOMINAL | | FIRST HOLE DIAMETER | 0.085 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322,4140 OR 6150 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A331,4140 OR 6150 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.020 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.085 INCHES NOMINAL | | SPECIAL FEATURES | HEAT TREATMENT: HEAT AT 1540-1580DEG. F.,OIL QUENCH,TEMPER 30 MIN. AT HEAT TO ROCKWELL HARDNESS C42-C47; 1 PIN-7267851-3; 1 CAP-7267851-2; 1/2 STRAIGHT KNURL,40-60 PITCH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL |
|
|