| EFFECTIVE LENGTH | 1.375 INCHES NOMINAL |
| DIAMETER | 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| HEAD STYLE | DOUBLE CHAMFER |
| HEIGHT | 0.656 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| PIN HEAD DIAMETER | 0.527 INCHES MINIMUM AND 0.529 INCHES MAXIMUM |
| SPECIAL FEATURES | HEAD COUNTERBORED 0.375 IN. DIA BY 0.156 IN. DEEP |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 125.0 MICROINCHES SHOULDER END |
| SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE |
| SURFACE FINISH | 63.0 MICROINCHES HEAD OUTSIDE DIAMETER |
| SURFACE FINISH | 63.0 MICROINCHES HEAD TOP |
| SURFACE FINISH | 63.0 MICROINCHES LONG END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| UNDERCUT DIAMETER | 0.226 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 1.532 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.031 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |