|
|
|
National Stock Number:
5315-00-349-1767
Federal Supply Class:
5315
National Item Identification Number:
003491767
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 30-2026-1 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | FIRST END STYLE | POINTED | | FIRST END TAPER ANGLE | 90.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.500 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.189 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | HARDNESS RATING | 33.0 ROCKWELL C NOMINAL OVERALL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 OVERALL | | PIN OVERALL DIAMETER | 0.4960 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.790 INCHES MINIMUM AND 3.810 INCHES MAXIMUM | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SPECIAL FEATURES | POINTED END HAS A 0.090 IN. SPHERICAL RADIUS | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
|
|