| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.850 INCHES MINIMUM AND 1.870 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| HARDNESS RATING | 43.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5743 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 634 OVERALL |
| PIN OVERALL DIAMETER | 0.6180 INCHES MINIMUM AND 0.6230 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 2.120 INCHES MINIMUM AND 2.150 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| SURFACE FINISH | 63.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |