| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.708 INCHES MINIMUM AND 1.728 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.101 INCHES MINIMUM AND 0.121 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.109 INCHES MINIMUM AND 0.114 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 1010 OVERALL |
| PIN OVERALL LENGTH | 1.930 INCHES MINIMUM AND 1.950 INCHES MAXIMUM |
| PIN OVERALL DIAMETER | 0.4970 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.109 INCHES MINIMUM AND 0.114 INCHES MAXIMUM |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE FINISH | 63.0 MICROINCHES BOTH ENDS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CHROMIUM OVERALL |