| EFFECTIVE LENGTH | 2.172 INCHES MINIMUM AND 2.203 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.297 INCHES MINIMUM AND 2.328 INCHES MAXIMUM |
| DIAMETER | 1.248 INCHES MINIMUM AND 1.249 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.656 INCHES NOMINAL |
| FEATURES PROVIDED | CASEHARDENED |
| FIRST END LOCATION | BOTH ENDS |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| HARDNESS RATING | 56.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| OVERALL LENGTH | 3.609 INCHES MINIMUM AND 3.641 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 1025 OR STEEL COMP 1020 OVERALL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| SECOND UNDERCUT WIDTH | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| SPECIAL FEATURES | ONE SLOT IN MIDDLE OF EFFECTIVE LG 0.266 TO 0.297 IN. WIDTH |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 63.0 MICROINCHES SHANK END |
| UNDERCUT DIAMETER | 1.172 INCHES MINIMUM AND 1.203 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |