|
|
|
National Stock Number:
5315-00-364-1751
Federal Supply Class:
5315
National Item Identification Number:
003641751
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 3202005 | 55380 | HATCH & KIRK, INC. | | 3202005 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV |
|
Techincal Specification:
| FIRST END LOCATION | BOTH ENDS | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | | OVERALL LENGTH | 0.641 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY NO. 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND SHANK DIAMETER | 0.5005 INCHES MINIMUM AND 0.5015 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.281 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.031 INCHES NOMINAL | | SHANK DIAMETER | 0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM | | SHANK LENGTH | 0.125 INCHES NOMINAL | | SHOULDER DIAMETER | 0.625 INCHES NOMINAL | | STYLE DESIGNATOR | UNDERCUT | | UNDERCUT DIAMETER | 0.469 INCHES NOMINAL | | UNDERCUT WIDTH | 0.031 INCHES NOMINAL |
|
|