|
|
|
National Stock Number:
5315-00-373-3031
Federal Supply Class:
5315
National Item Identification Number:
003733031
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 4018610 | 02991 | THOMPSON AEROSPACE, LLC | | 4018610 | 04861 | COOPER INDUSTRIES INC COOPER PETROLEUM EQUIPMENT DIV SUNNYVALE OPERATION | | 4018610 | 06680 | LAUBE CORP THE | | 4018610 | 0R803 | PRATT & WHITNEY MEASUREMENT SYSTEMS INC. DBA PRATT & WHITNEY | | 4018610 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 4018610 | 52661 | RTX CORPORATION | | 4018610 | 77445 | RTX CORPORATION | | 4018610 | 97139 | THE SLABE MACHINE PRODUCTS LLC | | 4018610 | J1695 | KITO MFG CO. LTD | | 4018610 | S0254 | KITO MFG CO. LTD |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 40.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 410 OVERALL | | PIN OVERALL LENGTH | 1.915 INCHES MINIMUM AND 1.935 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.2200 INCHES MINIMUM AND 0.2210 INCHES MAXIMUM | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 50.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
|
|